Density at 15 °C = kg/m3 (table 54B). Refer to bulletin V for more . Values calculated as per API Standard () Chapter To obtain the net. found in the second column of Table 1. standard density value stated in Table 1, in conjunction with the API table 54 B, at the . API Chapter ,. Gasoline: Alcohol Blends. (15% alcohol max). Table 54B. The volume correction tables to be used are those known to be . API chapter Table 54B (mean density), API chapter M.
|Published (Last):||1 August 2004|
|PDF File Size:||20.84 Mb|
|ePub File Size:||5.67 Mb|
|Price:||Free* [*Free Regsitration Required]|
It shall also state the reference pressure used, the reference density used, the mean temperature, mean pressure as well as the net and gross meter registrations.
V—Manual correction of measured liquid volumes to 111 volumes at reference conditions Category: For these reasons, the practice of manual temperature compensation, at all levels of trade, will tble be permitted after January 1, P E is “0” for liquids which have an equilibrium vapour pressure less than This bulletin communicates the policy and outlines the procedures for the manual correction of measured liquid volumes to equivalent volumes at reference conditions.
For additional information regarding this bulletin, please contact the Senior Program Officer responsible for volume.
The purpose of revision 3 was to update the format of the bulletin cchapter meet web accessibility requirements. Correction factors for the effect of pressure C pl on propane liquid volume Source: In situations where pressure compensation is desirable, additional dynamic pressure sensing elements must be provided in the metering installation.
These tables are summarized in Table 1. Since that time, the demand on manufacturers for this equipment has subsided and prices are more competitive.
API 11.2.1M Stream Density
If 54g temperature is to be manually determined, the contents of section 3 of this bulletin apply. However, such corrections or conversions must be performed using proper and prescribed methods in order to ensure an accurate statement of the net quantity.
It shall also state the reference density used, the mean temperature, the gross meter registration and the calculated net quantity. Please refer to the applicable bulletin for tables tablee for specific non petroleum-based products. Read the VCF corresponding to the mean liquid temperature.
API M Stream Density
If cgapter, interpolate the VCF value to the nearest 0. Monitoring of the marketplace has shown that the procedures set out in this bulletin have not been universally applied, thereby resulting in inaccurate trade measurement and potential fraud.
This table is either as prescribed in section of the Weights and Measures Regulations or in the appropriate bulletin. The purpose of revision 2 was to set a date after which the tahle of manual temperature compensation will not be allowed.