Incorrect use of the positioner Type and Type can be dangerous to people, Bürkert. In view of the wide range of possible application cases, check . ,.nearby. environment.. The device is designed to be mounted on. Buy Now, In Stock: Burkert , Type Digital Electropneumatic Positioner for Integrated Mounting on Process Control Valves.
|Published (Last):||17 May 2009|
|PDF File Size:||3.42 Mb|
|ePub File Size:||11.7 Mb|
|Price:||Free* [*Free Regsitration Required]|
The detailed procedure can be found in the extensive menu description for DISP. Page 95 TypeStart-Up Operating structure: The actual value of the process factor is directly supplied to the device as mA, PT or a frequency signal.
TypeStart-Up Procedure: Z1 represents a disturbance variable.
POS — Setting of the end positions In this menu you can specify whether the pneumatic actuator has mechanical end positions or not. The current position of one of 6892 10 classes is assigned to each scan time. Page 2 We reserve the right to make technical changes without notice.
Default of the set-point value via the standard signal input If required, use longer hoses. Page TypeAuxiliary functions Specifying. The physical unit of the process actual value. Pneumatically operated 2 way Globe Control A change to the supply pressure will affect the aeration time which can be optimized in this way. Characteristic and step response of the D portion of a PID controller The binary outputs 1 and 2 can be used for one of the following outputs: Gurkert activation transfers P.
Page 14 – Combinations. Process controller top 70mm for act.
Type Control Head
To ensure that the input menu for CLOCK can be selected on buriert process level, the following functions must be activated in 2 stages: Page 28 – Technical. The display is adjusted to the set functions and operating levels. Page 48 TypeInstallation Move the actuator back burmert the rest position Turn the hand lever to the left with a screwdriver. The status signal, which is assigned to the diagnosis message, is indicated by a symbol. Input signals Process actual value X6.
TypeStart-Up Action Description If there are deviations from the set-point state, messages are output according to NE TypeStart-Up X.
The feedback of the current position POS or of the set-point value CMDof the process actual value PV or of the process set-point value SP can be transmitted to the control center via the analog output.
The depiction of the products may differ from the actual specific design. TypeTables for customer-specific settings onTenTs In this way the position of the actuator is changed until control difference is 0. The interval for outputting messages is specified by inputting a limit for the total number of piston movements. Configurable auxiliary functions Hierarchical.
Cutoff – Sealing Function TypeAuxiliary functions TypeAuxiliary functions Example. All operator actions can be implemented with the non-changeable master code. Process actual value input only Type Input.
TypeAuxiliary functions Procedure: The auxiliary function is activated via the ADD. TUNE function has been preset at the factory. Can be combined with. Only available if the function in the SIG. Page 34 TypeInstallation Example of a sensor calibration for frequency 88692 signal type: Page – P. Profibus Dp Configuration of the process values Process controller top 70 mm for act.
Burkert Type 8692 – Positioner TopControl
The actuator moves from its rest position to the end position. In addition to selecting the output, the switching status required for the binary output must be input.
Attaching the switch spindle Not required for actuators with attached control head or actuators on which a control head has already been attached.